DAKS + Spectralink

The Spectralink Web API interface is used to connect the DAKS server to the Spectralink Android-based terminals. This interface provides two apps (Alertview/Webview) that can be used to send messages to phones and receive message history from DAKS.

Note: The IP addresses of the devices are determined using the RisPort SOAP service of Cisco Unified Communications Manager.

The Web API interface supports the following functions:

• Text messaging
  • with 3 different ring tones
  • with output of alarm texts
  • with up to 5 soft keys (OK,POS,NEG,VOICE and CALL)
  • with call set-up to the ESPA4.4.4/ TAP/ ESPA-X initiator or to a conference
• History function (DAKS-side)

The XML-RPC interface is used to connect the DAKS server to the Spectralink KWS system.

The XML-RPC data interface supports the following functions:

• Sending/updating and deleting interactive messages
  • with output of multi-line messages (up to 160 characters)
  • with up to 3 different colors (red/yellow/green)
  • with up to 3 different message tones
  • with up to 9 different priority levels
  • with up to 3 soft keys (read, accept/deny and call setup)
  • with “overrule handset settings” (volume/vibration)
  • with call setup to the ESPA 4.4.4, TAP or ESPA-X initiator, or to a conference
• Alarm triggering
  • initiated by up to 50 different terminals (expandable to max. 200 with DAKSpro Personal Security)
  • with activation of a broadcast group depending on alarm type and personal security profile (alarm type, e.g., red button, man down, etc.)
  • with device-specific alarm text
    with localization data (transmission of visible base stations including field strengths)
• Positioning of DECT-IP terminals
  • with output of the visited DECT IP base station (visited station) or
  • with output of the strongest received DECT IP base station
  • with possible output of DECT RSSI field strength values
• History function (locally on the device)
• If the data connection to the KWS system fails:Fallback to telephone alerting
• Monitoring the data connection to the DECT-IP system
• Personal security functionalities (personal alarm signal system)

• High-performance messaging:Different priority levels and signaling
  • Message-specific icons
  • Direct user confirmations via soft keys
  • Long message texts
  • Message memory for subsequent retrieval
• DECT positioning
• Deliberate and automatic distress signals

Components

• Emergency Call Response Center:
  • DAKSpro
• PBX/DECT system:
  • Spectralink DECT Server 6500/8000 / VIP-DECT Server ONE 
    (can be connected to any existing telephone system or used completely independently)
• DECT mobile devices = personal alarm signal device with voice:
  • Spectralink Modell 7642 oder S37